Journal Information
Vol. 8. Issue 1.
Pages 127-133 (January - March 2019)
Download PDF
More article options
Vol. 8. Issue 1.
Pages 127-133 (January - March 2019)
Original Article
DOI: 10.1016/j.jmrt.2017.06.011
Open Access
Visible light mediated photocatalytic activity of cobalt doped Bi2O3 nanoparticles
Govintha Viruthagiria,
Corresponding author

Corresponding author.
, Palanisamy Kannanb,c
a Annamalai University, Department of Physics, Annamalai Nagar, Tamil Nadu, India
b Bharathiar University, R & D Center, Department of Physics, Coimbatore, Tamil Nadu, India
c Sri Vidya Mandir Arts and Science College, PG & Research Department of Physics, Katteri 636 902, Uthangarai, Tamil Nadu, India
This item has received

Under a Creative Commons license
Article information
Full Text
Download PDF
Figures (9)
Show moreShow less
Tables (2)
Table 1. XRD parameters of pure and Co-doped Bi2O3 nanoparticles.
Table 2. Band gap values of Bi2O3 for different concentrations of Co doping.
Show moreShow less

Herein, we suggest a novel chemical precipitation method to prepare different concentrations (0.05–0.25M) of cobalt doped Bi2O3 nanoparticles. The prepared products exhibit excellent structural and optical properties. The influence of doping on the morphology of Bi2O3 was analyzed by FE-SEM and confirmed by HR-TEM. Furthermore, the photocatalytic activities of the samples were studied in the degradation of methylene blue under visible light irradiation. Compared to bare Bi2O3, 3% of cobalt doped Bi2O3 showed the highest degradation in 135min of irradiation.

Bismuth oxide
Methylene blue
Full Text

Recent past semiconductor oxides in the nano regime have consumed ample space in the development activities of modern science. The use of semiconductor oxides in nanoscale provides many unique advantages. Due to large volume–surface ratio, nano-sized materials show different physical and chemical properties in comparison to bulk materials [1]. Among the semiconductor oxides, Bi2O3 finds application in gas sensors, fuel cells and photocatalysis [2–8]. However, the higher band gap of Bi2O3 (2–3.9eV) needs UV light for photodegradation, which prevents the usage of natural source sunlight. Therefore, the band gap tailoring is an important fact and can be achieved by metal ions doping. Generally, the metal ion doping makes radical changes in optical, electrical and magnetic properties of host material by altering its electronic structure. Many approaches have been followed so far to prepare Bi2O3 including co-precipitation, sol–gel, hydrothermal and colloid emulsion [9–12]. Among the different methods, chemical precipitation is cost effective and less time consuming [13]. Many reports have been published on Bi2O3 for photocatalytic applications; however, reports on the sunlight mediated photocatalytic activity of Bi2O3 are limited. Recently, Mail Schlesinger et al. have demonstrated the photodegradation of methylene blue by Bi2O3 nanostructure under visible light irradiation [14]. Hicham Oudghiri-Hassani et al. have reported the photocatalytic activity of α-Bi2O3 nanoparticles in the degradation of rodamine B under UV light irradiation [15]. Sini Kuriakose et al. have shown that cobalt doped ZnO nanorods exhibit highly enhanced methylene blue degradation than pure ZnO nanorods [16].

Herein, we present a chemical precipitation approach to synthesize different levels of cobalt doped α-Bi2O3 nanoparticles. The synthesized products were analyzed for their structural, optical and morphological characterizations. Furthermore, the prepared products were analyzed under sunlight irradiation by degradation of organic dye methylene blue (MB).

1.1Synthesis of undoped and transition metals doped bismuth oxide nanoparticles

In the present study bismuth nitrate penta hydrate (Bi2(NO3)2·5H2O), sodium hydroxide (NaOH), cobalt nitrate (Co(NO3)2·2H2O) were used. All chemicals were used as received in analytical reagent (AR) grade.

For the preparation of 0.05M of cobalt doped Bi2O3, 1.0M of bismuth nitrate penta hydrate was dissolved in 50mL of deionized water and then stirred the solution vigorously. Then, 0.05g of cobalt dissolved in 50mL of deionized water was mixed. Finally, 0.1M of sodium hydroxide dissolved in 50mL of deionized water was added drop wise to the above solution under stirring. The entire solution was stirred continuously for 4h at 80°C until a light yellow precipitate was formed. Then, the obtained precipitate was washed repeatedly with deionized water and then filtered. The precipitate was dried in hot air oven at 100°C for 1h, and then annealed at 500°C in a muffle furnace for 4h to get phase pure cobalt doped bismuth oxide nanopowders. The same procedure was repeated for other concentrations of doping. In the preparation of pure Bi2O3, the above stated procedure was adopted in the absence of cobalt.


The crystalline phase and particle size of undoped and Co doped Bi2O3 nanoparticles were analyzed by powder X-ray diffraction (XRD) measurement which was carried out at room temperature by using the X’PERT-PRO diffractometer system (scan step of 0.05° (2θ), counting time of 10.16s per data point) equipped with a Cu tube for generating Cu Kα radiation (k=1.5406Å); as an incident beam in the 2-theta mode over the range of 10–80°, operated at 40kV and 30mA. The band gap energy was measured at wavelength in the range of 250–900nm by using UV–vis–NIR spectrophotometer Varian/carry 5000 equipped with an integrating sphere and the baseline correction was performed using a calibrated reference sample of powdered barium sulphate (BaSO4). The photoluminescence (PL) emission spectra of the samples were recorded with a Spectroflurometer (Jobin Yvon, FLUOROLOG-FL3-11). The functional groups were determined by a SHIMADZU-8400 Fourier transform infrared spectrometer in which the IR spectra were recorded by diluting the milled powders in KBr and the wavelength between 4000 and 400cm−1. The morphological analysis was performed by a JEOL: JSM-6390 scanning electron microscope (SEM) with the operating voltage of 20kV and confirmed by JEOL transmission electron microscopy (TEM) with operating voltage of 120kV. Energy-dispersive spectrum (EDS) analysis of the products was performed during SEM measurements. The UV–vis absorption measurements of the products during photocatalytic measurements were recorded in the wavelength range of 400–800nm using a Shimadzu UV1800 spectrometer.

1.3Photocatalytic activity experiment

Photocatalytic activity of undoped and Co doped Bi2O3 nanoparticles, was evaluated by studying photodegradation of MB dye solution under sunlight radiation. The undoped and Co doped Bi2O3 nanoparticles (0.15g) were taken in separate open borosilicate glasses of 250mL capacity. 100mL of BG dye solution of initial concentration (5mg/L) were then added to those vessels and the contents were stirred keeping irradiated under sunlight. All the experiments were conducted between 11.00am and 02.00pm under direct sunlight and the solar intensity (1250×100 Lu±100) was almost constant. After predetermined time intervals, adequate quantity of solutions were taken out and centrifuged (Remi centrifuge, Model No: C-85414 with 3000rpm). The concentration of BG in supernatant was analyzed using a Shimadzu UV1800 spectrophotometer by measuring the absorbance at respective λmax of 664nm. The percentage of degradation of BG dye was calculated from the following equation [17].

where Co is the initial concentration of BG dye solutions (mg/L), Ct is the concentration of dye after irradiation after selected time interval (mg/L).

2Results and discussion2.1Structural studies

Fig. 1 shows the diffraction patterns of undoped and Co-doped α-Bi2O3 nanoparticles. All the products show the reflections from (120), (121), (112), (041), (321) and (220) planes enlightening the monoclinic crystal structure of Bi2O3 (JCPDS: 71-0465). No reflections related to cobalt or oxides of cobalt are noted enlightening the formation of pure phase of Bi2O3. However, the effect of doping implies a non monotonic shift in the diffraction patterns toward the higher angle region exhibiting the successful incorporation of cobalt in to Bi2O3. The average crystallite sizes of the products were calculated using Scherer's formula [17]. The calculated crystallite sizes and lattice parameters values are presented in Table 1. From the table, it is noted that the crystallite size decreases gradually with an increase in the cobalt doping.

Fig. 1.

The magnified characteristic peaks of undoped and different concentrations of Co-doped α-Bi2O3 nanoparticles.

Table 1.

XRD parameters of pure and Co-doped Bi2O3 nanoparticles.

Samples  Crystallite size (nm)  Lattice parameters (Å) 
    a  b  c  Volume of the cell  Beta angle 
Bi2O3  54.43  5.8608  8.1336  7.7942  340.86  113.45 
Bi2O3:Co (0.05M)  44.92  5.860  8.144  7.506  329.813  112.99 
Bi2O3:Co (0.10M)  48.61  5.954  8.171  7.892  337.08  113.52 
Bi2O3:Co (0.15M)  48.30  5.881  8.138  7.693  347.617  114.55 
Bi2O3:Co (0.20M)  42.15  5.866  8.165  7.524  331.95  112.98 
Bi2O3:Co (0.25M)  30.62  5.837  8.130  7.204  317.8  111.99 
2.2UV–vis absorption spectra

The optical property of undoped and Co-doped α-Bi2O3 was studied by UV–vis absorption spectra. Fig. 2 displays the UV–vis absorption results of undoped and Co-doped α-Bi2O3. As seen in figure, on increasing the concentration of doping the absorption edges are shifted toward the longer wavelength region indicating decrease in the band gap of Bi2O3 on doping [18]. Furthermore, the intensity of absorption also increases as the concentration of doping increases. The band gap energies of undoped and cobalt doped α-Bi2O3 particle were explored by wavelength obtained from UV–vis absorption spectra using the usual equation [14] and the obtained values are presented in Table 2. As reported in the table, the value of band gap decreases gradually with an increase in the level of doping. As supportive information the doping concentration versus band gap graph was drawn and is presented as Fig. 2a.

Fig. 2.

UV–vis-DRS spectra of undoped and different concentrations of Co-doped α-Bi2O3 nanoparticles. (a) Band gap values of α-Bi2O3 nanoparticles as a function of various Co concentrations

Table 2.

Band gap values of Bi2O3 for different concentrations of Co doping.

S. no  Concentration mole  Bandgap (eV) 
0.05  2.2103 
0.1  2.0696 
0.15  2.045 
0.2  1.9809 
0.25  1.9424 

For semiconductors, the photoluminescence (PL) spectra are related to the transfer behavior of the photo induced electrons and holes, so that it can reflect the separation and recombination of photo induced charge carriers [19]. Fig. 3 shows the room temperature photoluminescence spectra (excitation wavelength at 330nm) of the undoped and different levels (0.05–0.25M) of Co2+ doped α-Bi2O3 nanoparticles. It can be observed that all the samples show a bluish green emission peak centered at 466nm, which could be ascribed to slight structural defect of the prepared samples [20]. However, the intensity of the bluish green emission decreases with an increase in the concentration of doping. Actually, transition metal doping can introduce shallow donor or acceptor levels, which may be responsible for quenching of band edge luminescence in the case of doped α-Bi2O3 nanostructures. Generally, at a high Co2+ incorporation, the cobalt atoms have a tendency to form clusters around oxygen. The formation of these clusters will cause passivation of the surface of α-Bi2O3 and may provide competitive pathways for recombination resulting quenching of broad bluish green emission, which means that the structural defect concentration in Co2+ doped samples decreases with higher Co content.

Fig. 3.

PL emission spectra of undoped and different concentrations of Co doped α-Bi2O3 nanoparticles.

2.4Functional group analysis

Fourier transform infrared spectra of undoped and Co-doped α-Bi2O3 were recorded in the range of 4000–400cm−1 as depicted in Fig. 4. All the samples show peaks of bending and stretching vibrations. The peak at about 566cm−1 represents the BiO bonds and was shifted to a new position of 577cm−1 on higher concentration of doping. The shifting can be ascribed to the change in the bond length that occurs when Co2+ ions substitute Bi2+ ions in the Bi2O3 lattice. The obtained band shift on doping is exactly matched with the result reported by other research group [21]. Furthermore, the appearance of Peaks near 830cm−1 and 1370–1390cm−1 are representing the existence of nitrate (NO3) ion [22].

Fig. 4.

FTIR spectra of undoped and different concentrations of Co-doped α-Bi2O3 nanoparticles.


The presence of peaks between 1620 and 1640cm−1 are due to the bending vibration of the absorbed water, and the peaks at around 3400–3500cm−1 are attributed to the stretching vibration of absorbed hydroxyl function groups [23].

2.5Field emission scanning electron microscopy (FE-SEM)

The surface morphology of the pure and Co-doped (0.15M) α-Bi2O3 nanostructures was analyzed by FE-SEM. Fig. 5a clearly shows that pure Bi2O3 shows the nano-sheet like morphology, whereas the Co-doped (0.15M) α-Bi2O3 composed of many inter connected narrow nanoplates (Fig. 5c). The EDX spectrum (Fig. 5b) reveals no extra peaks related to elements other than constituents. Furthermore, the EDX result of doped product confirms the presence of dopant (cobalt) in the matrix in the nominal value (Fig. 5d).

Fig. 5.

SEM micrograph of (a) Bi2O3, (c) Co-doped Bi2O3 with (b and d) corresponding EDX spectrum.


Further, the morphology confirmation was made by TEM analysis. Fig. 6a shows the HR-TEM image of the α-Bi2O3 sample. As observed in the figure, the appearances of fringe patterns exhibit the growth of α-Bi2O3. Whereas, the HR-TEM image of doped α-Bi2O3 shows the presence of well resolved fringe patterns of α-Bi2O3 (Fig. 7a). The TEM micrograph of α-Bi2O3 exhibits sheet like morphology (Fig. 6b), whereas, the doped α-Bi2O3 shows the needle like particles with a little agglomeration (Fig. 7b). Furthermore, the SAED patterns of undoped and Co-doped α-Bi2O3 exhibit the diffraction rings corresponding to (121), (112), (041), (321) and (220) planes of α-Bi2O3 (Figs. 6c and 7c).

Fig. 6.

(a) HR-TEM, (b) TEM and (c) SAED pattern of Bi2O3 nanoparticles.

Fig. 7.

(a) HR-TEM, (b) TEM and (c) SEAD pattern of Co-doped Bi2O3 nanoparticles.

2.6Evaluation of photocatalytic activity

The generation of photo induced electrons and holes as well as their separation, migration and capture by the reactive species is regarded as the basic process for the operation of semiconductor photocatalysts. Generally the photocatalytic activity of semiconductor photocatalysts not only depends on their electronic structure as well as depends on many other factors such as morphology, surface area and crystalline phase and size.

The photocatalytic activity of undoped and Co-doped (0.15M) α-Bi2O3 was investigated using degradation of aqueous methylene blue (MB) dye solution. Fig. 8a and b shows the absorption spectra of MB dye using undoped and Co-doped α-Bi2O3 catalysts as a function of wavelength (400–800nm) for various time intervals 0, 15, 30, 45, 60, 75, 90, 105, 120 and 135min. The degradation effect was characterized by monitoring the absorption peak of MB dye centered at 664nm.

Fig. 8.

Time dependent UV absorption spectra of MB degradation by (a) undoped and (b) Co-doped α-Bi2O3 nanoparticles.


From Fig. 9a and b, we can say that the maximum absorption peak (at 664nm) decreases with increasing irradiation time. This illustrates that the MB dye concentration decreases in the presence of undoped and doped catalysts under solar light illumination. The decrease in the absorption of the mixed solution was due to the destruction of the homo and hetro-poly aromatic rings present in the dye molecules.

Fig. 9.

Photo catalytic degradation rates of MB under solar light irradiation and pseudo first order rate constant (K) for the photo decomposition of MB for (a) pure and (b) Co doped α-Bi2O3 nanoparticles.


The effect of doping on the catalytic performance of α-Bi2O3 was evaluated from the percentage degradation of the MB dye. The percentage of degradation was calculated from the usual formula. The Bi2O3 doped with cobalt exhibits the best catalytic activity and the degradation of MB (97%) is almost complete after 135min. In contrast pure Bi2O3 degrades only 76.15% of MB after 135min. The potential reason for the enhanced catalytic activity of doped Bi2O3 is its improved charge separation efficiency and larger amount of MB absorption. Along with this cobalt doping may extend the photoresponse to the visible region and improves the photocatalytic activity of Bi2O3. The process of photocatalytic degradation of an organic dye can be understood as follows. The initial stage involves adsorption of the organic dye onto the surface of Bi2O3 nanostructure. Irradiation of MB adsorbed Bi2O3 with sunlight leads to the pair creation (electron–hole). These photogenerated electrons in the conduction band of Bi2O3 interact with the oxygen molecules adsorbed on Bi2O3 to form superoxide anion radicals (O2). The holes generated in the valence band of Bi2O3 react with the surface hydroxyl groups to form highly reactive hydroxyl radicals (OH). The highly reactive hydroxyl radicals and superoxide radicals react with MB dye adsorbed on Bi2O3 and lead to its degradation resulting in its colorless form [24].


In summary, we report a simple chemical precipitation route for the fabrication of undoped and Co-doped α-Bi2O3 nanoparticles. The diffraction results confirmed the formation of Bi2O3. The morphologies of the products were analyzed by FE-SEM and confirmed by TEM analysis. The results of the photocatalytic activity reveal that Bi2O3 doped with cobalt is better able to degrade MB, due to its enhanced charge separation efficiency and visible light photoresponse.

Conflicts of interest

The authors declare no conflicts of interest.

J.G. Hou, W.Z. Wang, W.B. Kan, S.Q. Jiao, H.M. Zhu.
J Mater Chem, 22 (2012), pp. 7291
P. Samoukhina, S. Kamba, S. Santhi, J. Petzelt, M. Valant, D. Suvorov.
Infrared and terahertz dielectric spectra of novel Bi2O3–Nb2O5 microwave ceramics.
J Eur Ceram Soc, 25 (2005), pp. 3085-3088
O. Turkoglu, M. Soylak, I. Belenli.
Synthesis and characterization of β type solid solution in the binary system of Bi2O3–Eu2O3.
Bull Mater Sci, 25 (2002), pp. 583-588
K.Z. Fung, J. Chen, A.V. Virkar.
Effect of aliovalent dopants on the kinetics of phase transformation and ordering in RE2O3–Bi2O3 (RE = Yb, Er, Y, or Dy) solid solutions.
J Am Ceram Soc, 76 (1993), pp. 2403-2418
P. Su, A.V. Virkar, C.R. Hubbard, O.B. Cavin, W.D. Porter.
Cubic-to-tetragonal displace transformation in Gd2O3–Bi2O3 ceramics.
J Am Ceram Soc, 76 (1993), pp. 2513-2520
N.I. Medvedeva, V.P. Zhukov, V.A. Gubanov, D.L. Novikov, B.M. Klgn.
Electronic structure and chemical bonding in δ-Bi2O3.
J Phys Chem Solids, 57 (1996), pp. 1243-1250
N. Mohamed Basith, J. Judith Vijaya, L. John Kennedy, M. Bououdina, S. Hussain.
Optical and magnetic properties of Co doped CuO flower/plates/particles like nano structures.
J Nanosci Nanotechnol, 14 (2014), pp. 2577-2583
M.M. Patil, V.V. Deshpande, S.R. Dhage, V. Ravi.
Synthesis of bismuth oxide nanoparticles at 100°C.
Mater Lett, 59 (2005), pp. 2523-2525
A. Ghadami Jadval Ghadam.
Characterization of CaCO3 nanoparticles synthesized by reverse microemulsion technique in different concentrations of surfactants.
Iran J Chem Chem Eng, 32 (2013), pp. 27-35
A. Akhoondi, M. Ziarati.
Hydrothermal production of highly pure nano pyrite in a stirred reactor.
Iran J Chem Chem Eng, 33 (2014), pp. 15-19
P. Novinrooz Sarabadani, J. Garousi.
Characterization of pure and antimony doped SnO2 thin films prepared by the sol–gel technique.
Iran J Chem Chem Eng, 25 (2006), pp. 31-38
K. Petcharoen, A. Sirivat.
Synthesis and characterization of magnetite nanoparticles via the chemical co-precipitation method.
Mater Sci Eng B, 177 (2012), pp. 421-427
V.V. Kharton, E.N. Naumovich, A.A. Yaremchenko, F.M.B. Marques.
Research on the electrochemistry of oxygen ion conductors in the former Soviet Union.
J Solid State Electrochem, 5 (2001), pp. 160-187
M. Schlesinger, S. Schulze, M. Hietschold, M. Mehring.
Metastable β-Bi2O3 nanoparticles with high photocatalytic activity from polynuclear bismuth oxides clusters.
Dalton Trans, 42 (2012), pp. 1047-1056
H. Oudghiri-Hassani, S. Rakass, F.T. Al Wadaani, K.J. Al-ghamdi, A. Owmer, M. Messali, et al.
Synthesis characterization and photocatalytic activity of α-Bi2O3 nanoparticles.
J Taibah Univ Sci, 9 (2015), pp. 508-512
S. Kuriakose, B. satpati, S. Mohapatra.
Enhanced photocatalytic activity of Co doped ZnO nanodisks and nanorods prepared by a facile wet chemical method.
Phys Chem Chem Phys, 16 (2014), pp. 12741-12749
P. Prasannalakshmi, N. Shanmugam.
Fabrication of TiO2/ZnO nanocomposites for solar energy mediated photocatalytic application.
Spectrochim Acta A: Molec Biomolec Spectrosc, 175 (2017), pp. 1-10
V. Stengl, S. Bakardjieva.
Molybdenum-doped anatase and its extraordinary photocatalytic activity in the degradation of orange II in the UV and vis regions.
J Phys Chem C, 114 (2010), pp. 19308-19317
J.G. Hou, W.Z. Wang, S.Q. Jiao, H.M. Zhu.
J Hazard Mater, 192 (2011), pp. 1772
C. Wang, C. Shao, L. Wang, L. Zhang, X. Li, Y.-C. Liu.
J Colloids Interface Sci, 333 (2009), pp. 242-248
Y.F. Chen, C.Y. Lee, M.Y. Yeng, H.T. Chin.
The effect of calcination temperature on the crystallinity of TiO2 nanopowder.
J Cryst Growth, 247 (2003), pp. 363
H. Fu, C. Pan, W. Yao, Y. Zhu.
Visible light induced degradation of Rhodamine B by nanosized BiZWOG.
J Phys Chem B, 109 (2005), pp. 22432-22439
T. Lopez, J.A. Moreno, R. Gomez, X. Bokhimi, J.A. Wang, H. Yee-Madeira, et al.
Characterization of iron doped titania sol gel materials.
J Mater Chem, 12 (2001), pp. 714-718
K. Li, C. Yang, Y. Xu, D. Ying, Y. Wang, J. Jia.
Effect of inorganic anions on rhodamine B removal under visible light irradiation using Bi2O3/Ti rotating disk reactor.
Chem Eng J, 211–212 (2013), pp. 208-215
Journal of Materials Research and Technology

Subscribe to our newsletter

Article options
Cookies policy
To improve our services and products, we use cookies (own or third parties authorized) to show advertising related to client preferences through the analyses of navigation customer behavior. Continuing navigation will be considered as acceptance of this use. You can change the settings or obtain more information by clicking here.