Journal Information

Articles in press

Articles in press are accepted, peer reviewed articles that are not yet assigned to volumes/issues, but are citable using DOI. More info

Variation in mechanical properties with MnO2 content in cast and forged in-situ Al-8Mg-MnO2 composites
Vikas Narain, Subrata Ray
10.1016/j.jmrt.2019.07.062
Open access
Available online 15 August 2019
Bio-active glass coatings manufactured by thermal spray: a status report
John Henao, Carlos Poblano-Salas, Mónica Monsalve, Jorge Corona-Castuera, Oscar Barceinas-Sanchez
10.1016/j.jmrt.2019.07.011
Open access
Available online 14 August 2019
Investigating microstructural evolution at the interface of friction stir weld and diffusion bond of Al and Mg alloys
M.A. Mofid, E. Loryaei
10.1016/j.jmrt.2019.06.049
Open access
Available online 14 August 2019
Microstructure and mechanical properties’ modification of low-temperature friction stir welded non-combustive Mg-9A1-1Zn-1Ca alloy joint
Nan Xu, Ruonan Feng, Qining Song, Yefeng Bao
10.1016/j.jmrt.2019.07.056
Open access
Available online 14 August 2019
The effect of induction heating power on the microstructural and physical properties of investment cast ASTM-F75 CoCrMo alloy
Thomas J. Fleming, Alan Kavanagh, Greg Duggan, Brian O’Mahony, Mackenzie Higgens
10.1016/j.jmrt.2019.07.052
Open access
Available online 14 August 2019
Yttria-stabilized zirconia (YSZ) film produced from an aqueous nano-YSZ slurry: preparation and characterization
Fitria Rahmawati, Nikmatus Zuhrini, Khoirina D. Nugrahaningtyas, Septia K. Arifah
10.1016/j.jmrt.2019.07.054
Open access
Available online 14 August 2019
Characterization of Y-bearing particles in CNS-I-ODS steel fabricated by vacuum induction melting & casting technique
Jian Feng, Qingzhi Yan, Xiaoxin Zhang, Zhiyuan Hong, Yingxue Chen
10.1016/j.jmrt.2019.06.048
Open access
Available online 13 August 2019
Conceptual design and simulation validation based finite element optimisation for tubercle leading edge composite wing of an unmanned aerial vehicle
Ernnie Illyani Basri, Faizal Mustapha, Mohamed Thariq Hameed Sultan, Adi Azriff Basri, Mohd Firdaus Abas, Mohd Shukry Abdul Majid, Kamarul Arifin Ahmad
10.1016/j.jmrt.2019.07.049
Open access
Available online 13 August 2019
Fabrication of Ti–Al–Cu new alloys by inductive sintering, characterization, and corrosion evaluation
El-Sayed M. Sherif, Hany S. Abdo, Fahamsyah H. Latief, Nabeel H. Alharthi, Sherif Zein El Abedin
10.1016/j.jmrt.2019.07.040
Open access
Available online 13 August 2019
A comparative study on the effects of dry and wet grinding on mineral flotation separation–a review
S. Chehreh Chelgani, M. Parian, P. Semsari Parapari, Y. Ghorbani, J. Rosenkranz
10.1016/j.jmrt.2019.07.053
Open access
Available online 12 August 2019
Journal of Materials Research and Technology

Subscribe to our newsletter

Cookies policy
To improve our services and products, we use cookies (own or third parties authorized) to show advertising related to client preferences through the analyses of navigation customer behavior. Continuing navigation will be considered as acceptance of this use. You can change the settings or obtain more information by clicking here.